Print one
The campaign scales one printer at a time. Everything is open — print a figure, place it kindly, log it.
1 · Download
Everything you need, right here. Three parts — one set serves every metro line (the glow color is your filament choice):
- la-espera-plate.stl — the tile, with magnet pockets
- la-espera-ink.stl — figure, name, QR
- la-espera-glow.stl — the phone screen
- la-espera-source.zip — full OpenSCAD source, to remix or make new poses
2 · Print
- PETG or ASA — the pieces live outdoors in the sun.
- 0.2 mm layers, any 0.4 nozzle. Import all three STLs as one object with multiple parts.
- Plate: warm white. Ink: black. Glow: the color of the metro line that serves — or should serve — your spot.
3 · Assemble
- Four 10×3 mm neodymium disc magnets, one drop of CA glue each, seat flush in the back pockets.
- Check it holds its own weight on a steel door before you go anywhere.
4 · The install ethic
- Magnets only. Never adhesive. Steel surfaces only.
- Never on or over signage, safety equipment, cameras, or anything operational. Never blocking anything.
- Installing on property you don't own isn't authorized, and pieces will be removed — that's part of the story, but the risk is yours. Know it, keep it removable, keep it kind.
5 · Log it
Photo + cross-streets → #laesperaor sightings@laespera.org. It joins the map.